HPV-75W series is a waterproof AC to DC LED drive power supply, to stable voltage constant current output design, using the international common AC input voltage range, with active power factor correction circuit, the whole series to provide 12V,24V output. With a conversion efficiency of up to 87%, the fanless design allows for operation in the case temperature range of -25°C to 70°C under natural air cooling.
Features :
Product Specifications· International common AC input voltage range
Constant voltage mode output
Built-in active PFC circuit
Protection characteristics: short circuit/over load/over temperature
Natural air cooling
Fully protected aluminum housing
Full glue filling, in line with IP65/IP67 protection grade, indoor/outdoor installation
Suitable for dry, wet and rainy environment
100% full load burning machine test
High efficiency, long life and high reliability
3-year quality guarantee
Application:
LED street lighting
LED wall wash light
LED patio lights
LED greenhouse lighting
LED floodlight
Electronic instruments, equipment and devices
Specifications
| Model | HPV-75-12 | HPV-75-24 | |
| Output | DC output voltage | 12V | 24V |
| Rated output current | 6.2A | 3.1A | |
| Output current range | 0~6.2A | 0~3.1A | |
| Output power | 75W | 75W | |
| Ripple&noise | 150mVp-p | 150mVp-p | |
| Voltage accuracy | ±3% | ||
| Linear adjustment rate | ±0.5% | ||
| Load adjustment rate | ±2% | ||
| Start, rise, hold time | 500ms,80ms,16ms/230VAC(At full load) | ||
| Input | Input voltage range | 100~240VAC,141~339VDC | |
| Frequency range | 47~63Hz | ||
| AC input voltage | 0.9A/115VAC 0.45A/230VAC | ||
| Power factor | PF>0.97/115VAC,PF>0.95/230VAC,PF>0.92/277VAC(full load) | ||
| Efficiency | 0.855 | 0.875 | |
| Impulse current | Cold start current 55A/230VAC | ||
| Leakage current | <2mA/240VAC | ||
| Protection | Over load | Start overload protection for 105% to 140% of rated output power | |
| Protection mode: In isolation mode, normal output can be automatically restored after abnormal conditions are removed | |||
| Overtemperature | 95°C±10°C(RTH2 detected next to T1) | ||
| Protection mode: Turn off the output voltage and recover after restart | |||
| Environment | Operating temperature | -30℃~+60℃ | |
| Working humidity | 20%~90%RH，non-condensing | ||
| Storage temp& humidity | -40℃~+85℃，10%~95%RH non-condensing | ||
| Shock resistance | 10~500Hz, 5G 12min./1 cycle, X, Y, Z axis, duration of 72 minutes | ||
| Safety | Pressure resistance | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
| Insulation resistance | I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC/25°C/70%RH | ||
| Fit standard | Safety standard | Conforms to EN61347-1, GB19510 | |
| EMC emission | Conforms to EN55015(CISPR22)Class B,GB/17743 Class B,GB17625.1,EN61000-3-2, -3 | ||
| EMC immunity | Conforms to EN61000-4-2, 3, 4, 5, 6, 8, 11 | ||
| Others | Dimension | 236*43*30mm (L*W*H) | |
| Weight/packing | 0.65kg/25pcs/17kg/0.023m³/0.8CUFT | ||
| Note | 1. All parameters, unless otherwise specified, are measured at 230VAC input voltage, rated load and 25°C. 2. The ripple and noise voltage are measured when the 20MHz bandwidth oscilloscope with a 12-inch twisted pair end is added with 0.1μ and 47μ capacitors. 3. Accuracy: voltage setting error, linear adjustment rate and load adjustment rate. 4. Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test. 5. Load adjustment rate measurement method: from 0% to 100% rated load. 6. The power supply should be considered as part of the components in the system, and the electromagnetic compatibility should be confirmed in conjunction with the terminal equipment. | ||
Dimensional Drawing
Block Diagram
Power Factor Characteristic Curve
Further information or a personal consultation? Our products and know-how are there to provide solutions.
Optimized by Seraphinite Accelerator
