- 200~240VAC AC input voltage range
- Small size, light weight, high efficiency
- Protection feature: short circuit/overload
- Air cooling
- With power-on display (LED)
- 100% full load burn test
- 2 years quality guarantee
The US-150N series is a 150W single output switch power supply with a 29mm low profile design. The entire series provides 12V, 24V, and 48V outputs with an efficiency of up to 93%. The metal casing design gives it excellent low electromagnetic emission interference and enhanced heat dissipation capabilities, allowing the US-150N to operate in a temperature range of -20 ℃ to+50 ℃ without a fan
Features :
200~240VAC AC input voltage range
Small size, light weight, high efficiency
Protection feature: short circuit/overload
Air cooling
With power-on display (LED)
100% full load burn test
2 years quality guarantee
Application:
LED lights with lighting
LED luminous subtitles
LED mobile sign
Specifications
| Model | US-150N-12 | US-150N-24 | US-150N-48 | |
| Output | DC output voltage | 12V | 24V | 48V |
| Output voltage tolerance | ±2% | ±2% | ±2% | |
| Rated output current | 12.5A | 6.3A | 3.2A | |
| Output current range | 0~12.5A | 0~6.3A | 0~3.2A | |
| Output power | 150W | 151.2W | 153.6W | |
| Load adjustment rate | 150mVp-p | 200mVp-p | 500mVp-p | |
| Start, rise, hold time | 200ms,20ms,24ms/230VAC | |||
| Input | Input voltage range | 200~240VAC,47~63Hz,282~339VDC | ||
| AC input current | 1.6A/230VAC | |||
| Efficiency | 0.9 | 0.92 | 0.93 | |
| Impulse current | Cold start current 55A/230VAC | |||
| Leakage current | <2mA/240VAC | |||
| Protection | Over load | Starting overload protection at 115%~135% of rated output power | ||
| Protection method: Isolation mode, automatically restored after removing abnormal load conditions | ||||
| Environment | Operating temperature | -20°C~+50°C(please refer to the load reduction curve) | ||
| Working humidity | 20%~90% RH without condensation | |||
| Storage temp& humidity | -20°C~+80°C; 10%-95% RH Non-condensing | |||
| Shock resistance | 10~500Hz, 2G 10min./1 cycle, duration 60 minutes, each axis | |||
| Safety | Pressure resistance | I/P~O/P :1.5KVAC I/P~FG :0.5KVAC O/P~FG :Isolation | ||
| Insulation resistance | I/P-O/P,I/P-FG,O/P-FG:50M Ohms/500VDC/25°C/70%RH | |||
| Fit standard | Safety standards | Compliant with UL 8750, IEC/EN 61347-1 | ||
| EMC emission | In accordance with EN 55015 Class A, EN 61000-3-2 | |||
| EMC immunity | In accordance with EN 61547 | |||
| Others | Dimension | 180*50*29mm (L*W*H) | ||
| Weight/packing | 0.28kg/60pcs/17.3kg/0.029m³/1.04CUFT | |||
| Note | 1. All parameters, unless otherwise specified, are measured at 230VAC input voltage, rated load and 25°C. 2. Ripple and noise voltages are measured on a 20MHz bandwidth oscilloscope with a 12-inch twisted pair end and a capacitor of 0.1 μand 47 μ. 3. Tolerance is the sum of voltage setting error, voltage adjustment rate and current adjustment rate. | |||
Dimensional Drawing
Block Diagram
Further information or a personal consultation? Our products and know-how are there to provide solutions.
Optimized by Seraphinite Accelerator
