MDR-20W is designed with plastic housing, can effectively prevent the user’s electrical hazards, working efficiency of up to 84%, under the condition of air circulation, the whole series can work in the ambient temperature of -20°C to 70°C, it has a complete protection function and conforms to the home automation, industrial control equipment IEC/EN62368-1, Standards such as IEC/EN55032 (CISPR32), IEC/EN61000-3-2) make the MDR-20W a highly competitive power solution for home and industrial applications.
Application:
Home control system
Building Automation
Industrial control systems
Factory Automation
Mechanical and electrical equipment
Specifications
| Model | MDR-20-5 | MDR-20-12 | MDR-20-15 | MDR-20-24 | |
| Output | DC output voltage | 5V | 12V | 15V | 24V |
| Rated output current | 3A | 1.67A | 1.34A | 1A | |
| Output current range | 0~3A | 0~1.67A | 0~1.34A | 0~1A | |
| Rated power | 15W | 20W | 20W | 24W | |
| Ripple noise | 80mvp-p | 120mvp-p | 120mvp-p | 150mvp-p | |
| Voltage adjustment range | 4.75~5.5V | 10.8~13.2V | 13.5~16.5V | 21.6~26.4V | |
| Voltage accuracy | ±2.0% | ±1.0% | ±1.0% | ±1.0% | |
| adjustment rate | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| Load adjustment rate | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| Start, rise, hold time | 500ms,30ms,50ms/230VAC 1000ms,30ms,20ms/115VAC(At full load) | ||||
| Input | Input voltage range | 100~240VAC,47~63Hz,141~339VDC | |||
| Efficiency | 0.76 | 0.8 | 0.81 | 0.84 | |
| Alternating current | 0.55A/115VAC，0.35A/230VAC | ||||
| Inrush current | Cold start current 20A/115VAC，40A/230VAC | ||||
| Leakage current | <1mA/240VAC | ||||
| Protection | Over load | 105%~160% of rated output power | |||
| Protection mode: Constant current limit, automatically restored after removing abnormal load conditions | |||||
| Over voltage | 5.75~6.75V | 13.8~16.2V | 17.25~20.25V | 27.6~32.4V | |
| Protection mode: Turn off output voltage, restore after restart | |||||
| Feature | DC OK signal value (Max) | 3.75~6V/50mA | 18~27V/20mA | ||
| Environment | Working temp,humidity | -20℃~+70℃，20%~90%RH | |||
| Storagetemp,humidity | -40℃~+85℃，10%~95%RH non-condensing | ||||
| Temperature coefficient | ±0.03%/°C(0-50°C) | ||||
| Withstand vibration | 10~500Hz,2G 10min./1 cycle, X, Y, Z 60 minutes each; Installation: According to IEC60068-2-6 | ||||
| Safety | Withstand voltage | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH | ||||
| Fit standard | Safety standards | IEC/EN62368-1, EN61558-1 | |||
| EMC emission | Complies with IEC/EN55032 (CISPR32) class A, IEC/EN61000-3-2, class A | ||||
| EMC immunity | Comply with IEC/EN55035, IEC/EN61000-6-2, IEC/EN61000-4-2, 3, 4, 5, 6, 8 | ||||
| Others | Dimension | 22.5 * 90 * 100 mm (W * H * D) | |||
| Weight/packing | 0.17 kg / 72 PCS / 13.2 kg / 1.04 CUFT | ||||
| Note | 1.Unless otherwise specified, all parameters are measured under 230VAC voltage input, rated load, and 25 ° C conditions. 2. Ripple and noise voltage were measured on a 20MHz bandwidth oscilloscope with 0.1 μ and 47 μ capacitors added to the end of a 12 inch twisted pair cable. 3. Accuracy: including setting error, linear adjustment rate, and load adjustment rate. 4. The power supply is considered as an independent component, but the final power supply still needs to be confirmed for electromagnetic compatibility with the terminal device. 5. The start-up time is measured during cold start, and frequent power on and off may result in longer start-up time. | ||||
Block Diagram
Further information or a personal consultation? Our products and know-how are there to provide solutions.
Optimized by Seraphinite Accelerator
