HDR-15W is designed with a plastic casing, which can effectively prevent electrical hazards to users, with a working efficiency of up to 86%. Under air circulation conditions, the entire series can operate in ambient temperatures ranging from -30 ° C to 60 ° C. It has complete protection functions and complies with standards such as home automation, industrial control equipment IEC/EN62368-1, IEC/EN55032 (CISPR32), IEC/EN61000-3-2) certification, making HDR-15W a highly competitive power solution for home and industrial applications.
Application:
Home control system
Building automation
Industrial control system
Factory automation
Mechanical and electrical equipment
Specifications
| Model | HDR-15-12 | HDR-15-15 | HDR-15-24 | HDR-15-48 | |
| Output | DC voltage | 12V | 15V | 24V | 48V |
| Rated current | 1.25A | 1.0A | 0.63A | 0.32A | |
| Current range | 0~1.25A | 0~1.0A | 0~0.63A | 0~0.32A | |
| Rated power | 15W | 15W | 15.2W | 15.4W | |
| Ripple&noise | 120mvp-p | 150mvp-p | 240mvp-p | 480mvp-p | |
| DCvoltage ADJ.range | 10.8~13.8V | 13.5~18V | 21.6~29V | 43.2~55.2V | |
| Voltage tolerance | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| Linear adjustment rate | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| Load adjustment rate | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| Start, rise, hold time | 2000ms,80ms,30ms/230VAC 2000ms,80ms,12ms/115VAC(At full load) | ||||
| Input | Input voltage range | 100~240VAC,47~63Hz,141~339VDC | |||
| Efficiency | 0.84 | 0.84 | 0.85 | 0.86 | |
| AC current | 0.5A/115VAC，0.25A/230VAC | ||||
| Surge current | Cold start current 25A/115VAC，45A/230VAC | ||||
| Protection | Over load | Rated output power115%~150% | |||
| Output voltage<50%:Hiccup mode，auto-recovery after fault condition is removed | |||||
| Output voltage 50%~100%，auto-recovery after fault condition is removed | |||||
| Over voltage | 14.2~16.2V | 18.8~22.5V | 30~36V | 56.5~64.8V | |
| protection type:turn off output, clamped by Zener diode | |||||
| Environment | Working temp,humidity | -30℃~+60℃，20%~90%RH | |||
| Storagetemp,humidity | -40℃~+85℃，10%~95%RH non-condensing | ||||
| Temperature coefficient | ±0.03%/°C(0-50°C) | ||||
| Withstand vibration | 10~500HZ，2G 10min/1cycle，60 minutes each for X/Y/Z; Installation; Compliant with IEC60068-2-6 | ||||
| Safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC | ||||
| Fit standard | Safety standards | IEC/EN62368-1，EN61558-1 | |||
| EMC emission | Compliant with IEC/EN55032（CISPR32) class A，IEC/EN61000-3-2，class A | ||||
| EMC immunity | Compliant with IEC/EN55035，IEC/EN61000-6-2，IEC/EN61000-4-2、3、4、5、6、8 | ||||
| Others | Dimension | 17.5*90*54.5mm (W*H*D) | |||
| Weight/packing | 0.08kg/180pcs/15.4kg/0.035m³/1.24CUFT | ||||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||||
Block Diagram
Further information or a personal consultation? Our products and know-how are there to provide solutions.
Optimized by Seraphinite Accelerator
