The RSP-500W series is a 500W single-output housing type AC to DC power supply. The full range of input voltages ranges from 100 to 240VAC and provides DC outputs to meet most industrial needs. Each model can be air-cooled by an internal speed fan with an operating temperature of 70°C. In addition, the RSP-500W offers design flexibility with built-in features such as remote on/off control and remote sensing.
Features :
International universal full range of AC input
Built-in active PFC function
Efficiency up to 90.5%
Built-in DC fan for forced cooling
Remote control switch/remote sensing function
Protection type: short circuit/over load/over voltage/over temperature
3-year quality guarantee
Application:
Industrial control or automation devices
Test and measurement instruments
Laser related machines
Aging equipment
Specifications
| Model | RSP-500-12 | RSP-500-15 | RSP-500-24 | RSP-500-27 | RSP-500-48 | |
| Output | DC voltage | 12V | 15V | 24V | 27V | 48V |
| Rated voltage | 41.7A | 33.4A | 21A | 18.6A | 10.5A | |
| Current range | 0~41.7A | 0~33.4A | 0~21A | 0~18.6A | 0~10.5A | |
| Rated power | 500.4W | 501W | 504W | 502.2W | 504W | |
| Ripple noise | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | |
| Voltage regulation range | 10~13.2V | 10~13.2V | 20~26.4V | 26~30V | 41~56V | |
| Voltage accuracy | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| Linear adjustment rate | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | |
| Load adjustment rate | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| Start, rise, hold time | 1500ms,80ms,18ms/230VAC 3000ms,80ms,14ms/115VAC(At full load) | |||||
| Input | Voltage range | 100~240VAC,142~339VDC | ||||
| Frequency range | 47~63Hz | |||||
| Power factor | PE>0.95/230VAC PE>0.98/115VAC(full load) | |||||
| Efficiency | 0.88 | 0.88 | 0.89 | 0.895 | 0.905 | |
| Alternating current | 5.3A/115VAC 2.65A/230VAC | |||||
| Inrush current | 20A/115VAC 40A/230VAC | |||||
| Leakage current | <2.0mA/240VAC | |||||
| Protection | Over duty | 105% ~ 130% of rated output power | ||||
| Protection mode: constant current limit, abnormal conditions can be automatically restored after removal | ||||||
| Overvoltage | 13.8~16.2V | |||||
| Protection mode: Turn off the output voltage and recover after restart | ||||||
| Overtemperature | Turn off the output voltage and recover automatically after the temperature drops | |||||
| RC+/RC-:0.8V: Power on; 4 to 10V: The power supply is off | ||||||
| Environment | Remote control switch | The maximum load line voltage drop compensation by remote sensing is 0.3V | ||||
| Remote sensing | RTH2≥50°C±10°C The fan is on. RTH2≤40°C±10°C Fan off (3.3~5V fan is always working,2~48V fan on/off control) | |||||
| Fan Control (Typ) | -30~+70°C(please refer to “Derating Curve”) | |||||
| Safety | Working temp,humidity | 20%～90%RH,non-condensing | ||||
| Storage temp& humidity | -40℃ ~ +85℃; 10%-95% RH Non-condensing | |||||
| Temperature coefficient | ±0.03%/°C(0~50°C) | |||||
| Vibration resistance | 10 ~ 500Hz, 2G 10min./1 cycle, X, Y, Z axis, duration of 60 minutes | |||||
| Fit standard | Withstand voltage | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||
| Insulation impedance | I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC/25°C/70%RH | |||||
| Safety standard | UL62368-1, EN/EN62368-1, GB4943.1 | |||||
| EMC emission | Conforms to EN55032(CISPR22)Class B,IEC/EN61000-3-2, Class A | |||||
| EMC immunity | Comply with IEC/EN55035, IEC/EN61000-6-2, IEC/EN61000-4-2, 3, 4, 5, 6, 8 | |||||
| Other | MTBF | 1372.4K hrs min. Telcordia SR-332(Bellcore);187.9K hrs min. MIL-HDBK-217F(25°C) | ||||
| Dimension | 230*127*40.5mm (L*W*H) | |||||
| Weight/packing | 1.3kg/9pcs/12.7kg/0.7CUFT | |||||
| Note | 1. All parameters, unless otherwise specified, are measured at 230VAC input voltage, rated load and 25°C. 2. Ripple and noise voltages are measured on a 20MHz bandwidth oscilloscope with a 12-inch twisted pair end and a capacitor of 0.1 μand 47 μ. 3. Accuracy: voltage setting error, linear adjustment rate and load adjustment rate. 4. Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test. 5. Load adjustment rate measurement method: from 0% to 100% rated load. 6. The power supply should be considered as part of the components in the system, and the electromagnetic compatibility should be confirmed in conjunction with the terminal equipment. | |||||
Dimensional drawing
Block diagram
This section describes the functions of the CN100
| Pin number | Feature | Description |
| 1 | -S | The inductive signal -,-S is connected to the negative end of the load. +S,-S should be twisted to minimize the impact of noise. The maximum line voltage drop can be compensated to 0.3V. |
| 2 | +S | Inductive signal +,+S connected to the positive end of the load,+S,-S should use stranded wire to minimize the impact of noise, the maximum line voltage drop can be compensated to 0.3V. |
| 3 | RC- | Return RC+ signal input |
| 4 | RC+ | Power is turned on or off by an electronic switch or dry contact between pin 4(RC+) and PIN 3 (RC-). 0~0.8V: Power on,4~10V: power off |
Function manual
Remote control
The PSU can be controlled on/off by remote control
| Between RC+(pin3) and RC-(pin4) | Output state |
| The switch is off (0 ~ 0.8V) or open | Open |
| Switch on (4 ~ 10V) | Close |
Remote sensing
The maximum load line voltage drop compensation by remote sensing is 0.3V
Further information or a personal consultation? Our products and know-how are there to provide solutions.
Optimized by Seraphinite Accelerator
