Our website uses cookies to improve your experience and record usage statistics. By using our site you consent to cookies as described in our Privacy Policy. We take your privacy and data security very seriously and all information collected will be kept strictly confidential.
RSP-350 is a 350W single output enclosed type AC to DC power supply.This series operates for 90~264VAC input voltage and offers the models with the DC output mostly demanded fromthe industry. Each model is cooled by the built-in fan with fan speed control, working for thetemperature up to 70°C.
Features :
Universal AC input range (90~264VAC)
Protections:Short circuit/Overioad/Over voltage/Over temperature
Forced air cooling by built-in DC fan
Built-in active PFC function(PF>0.95)
Operating altitude up to 5000 meters
100% full load burn-in test
High efficiency,long life and high reliability
3 years warranty
Application:
Factory control or automation apparatus
Test and measurement instrument
Laser related machine
Burn-in facility
RF application
Specifications
Specifications
Model
RSP-350-12
RSP-350-24
RSP-350-48
Output
DC voltage
12V
24V
48V
Rated voltage
29A
14.6A
7.3A
Current range
0~29A
0~14.6A
0~7.3A
Rated power
348W
350.4W
350.4W
Ripple noise
150mVp-p
200mVp-p
240mVp-p
Voltage regulation range
10~13.2V
20~26.4V
41~56V
Voltage accuracy
±1.0%
±1.0%
±1.0%
Linear adjustment rate
±0.2%
±0.2%
±0.2%
Load adjustment rate
±0.5%
±0.5%
±0.5%
Start, rise, hold time
1000ms,50ms,15ms/230VAC 2000ms,50ms,10ms/115VAC(At full load)
Protection type:hiccup mode,auto-recovery after fault condition is removed
Overvoltage
Rated output voltage 115%-120% Start over voltage protection
Protection type:cut off the output,auto-recovery after fault condition is removed
Overtemperature
95°C±10°C(RTH3 detect beside magnetic core)
Protection type:cut off the output,auto-recovery after the temperature become normal
Safety
Fan Control (Typ)
RTH2≥50℃±10℃ Fan on; RTH2≤40℃± 10°C Fan off
Working temp,humidity
-30~+70°C(please refer to “Derating Curve”)
Storage temp& humidity
20%~90%RH,non-condensing
Temperature coefficient
-40℃ ~ +85℃; 10%-95% RH Non-condensing
Vibration resistance
10 ~ 500Hz, 3G 10min./1 cycle, Period for 60min, Each axes
Fit standard
Withstand voltage
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Insulation impedance
I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC/25°C/70%RH
Safety standard
Compliance to UL 62368-1,TUV EN 62368-1,KC 62368-1
EMC emission
Compliance to EN 55032(CISPR22)Class B,GB9254 Class B,EN 61000-3-2,3
EMC immunity
Compliance to EN 61000-4-2,3,4,5,6,8,11,EN 55024,EN 61000-6-1
Other
MTBF
≥1460K hrs min. MIL-HDBK-217F(25°C)
Dimension
215*115*30 mm(L*W*H )
Weight/packing
0.9kg/24pcs/21.6kg/0.027m³/0.96CUFT
Note
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The ambient temperature derating of 5℃/1000 m is needed for operating altitude greater than 2000m(6500ft).
7. The power supply is considered as a component which will be installed into a finalequipment,The final equipment must be re-confirmed that it still meets EMC directives, For guidance on how to perform these EMC tests.
Dimensional Drawing
Dimensional drawing
Block diagram
Get A Quote
Further information or a personal consultation? Our products and know-how
are there to provide solutions.