...

Our website uses cookies to improve your experience and record usage statistics. By using our site you consent to cookies as described in our Privacy Policy. We take your privacy and data security very seriously and all information collected will be kept strictly confidential.

Decline All Accept All

Ultra-thin PFC-Standard Enclosed Switching Power Supply 350W

  • Universal AC input range (90~264VAC)
  • Protections:Short circuit/Overioad/Over voltage/Over temperature
  • Forced air cooling by built-in DC fan
  • Built-in active PFC function(PF>0.95)
  • Operating altitude up to 5000 meters
  • 100% full load burn-in test
  • High efficiency,long life and high reliability
  • 3 years warranty

 

Get A Quote
Product Description

RSP-350 is a 350W single output enclosed type AC to DC power supply.This series operates for 90~264VAC input voltage and offers the models with the DC output mostly demanded fromthe industry. Each model is cooled by the built-in fan with fan speed control, working for thetemperature up to 70°C.

 

Features :

Universal AC input range (90~264VAC)
Protections:Short circuit/Overioad/Over voltage/Over temperature
Forced air cooling by built-in DC fan
Built-in active PFC function(PF>0.95)
Operating altitude up to 5000 meters
100% full load burn-in test
High efficiency,long life and high reliability
3 years warranty

 

Application:

Factory control or automation apparatus
Test and measurement instrument
Laser related machine
Burn-in facility
RF application

 

Specifications

Specifications

Model RSP-350-12 RSP-350-24 RSP-350-48
Output DC voltage 12V 24V 48V
Rated voltage 29A 14.6A 7.3A
Current range 0~29A 0~14.6A 0~7.3A
Rated power 348W 350.4W 350.4W
Ripple noise 150mVp-p 200mVp-p 240mVp-p
Voltage regulation range 10~13.2V 20~26.4V 41~56V
Voltage accuracy ±1.0% ±1.0% ±1.0%
Linear adjustment rate ±0.2% ±0.2% ±0.2%
Load adjustment rate ±0.5% ±0.5% ±0.5%
Start, rise, hold time 1000ms,50ms,15ms/230VAC    2000ms,50ms,10ms/115VAC(At full load)
Input Voltage range 90~264VAC,127~370VDC
Frequency range 47~63Hz
Power factor PF>0.95/230VAC 
Efficiency 0.87 0.88 0.89
Alternating current 4.5A/115VAC    2.5A/230VAC
Inrush current 20A/115VAC     40A/230VAC
Leakage current <2.0mA/240VAC
Protection Over duty Rated output power:105%~130% Start overload protection
Protection type:hiccup mode,auto-recovery after fault condition is removed
Overvoltage Rated output voltage 115%-120% Start over voltage protection
Protection type:cut off the output,auto-recovery after fault condition is removed
Overtemperature 95°C±10°C(RTH3 detect beside magnetic core)
Protection type:cut off the output,auto-recovery after the temperature become normal
Safety Fan Control (Typ) RTH2­≥50℃±10℃ Fan on; RTH2≤40℃± 10°C Fan off
Working temp,humidity -30~+70°C(please refer to “Derating Curve”)
Storage temp& humidity 20%~90%RH,non-condensing
Temperature coefficient -40℃ ~ +85℃; 10%-95% RH Non-condensing
Vibration resistance 10 ~ 500Hz, 3G 10min./1 cycle, Period for 60min, Each axes
Fit standard Withstand voltage I/P-O/P:3KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC
Insulation impedance I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC/25°C/70%RH
Safety standard Compliance to UL 62368-1,TUV EN 62368-1,KC 62368-1
EMC emission Compliance to EN 55032(CISPR22)Class B,GB9254 Class B,EN 61000-3-2,3
EMC immunity Compliance to EN 61000-4-2,3,4,5,6,8,11,EN 55024,EN 61000-6-1
Other MTBF ≥1460K hrs min. MIL-HDBK-217F(25°C)
Dimension 215*115*30 mm(L*W*H )
Weight/packing 0.9kg/24pcs/21.6kg/0.027m³/0.96CUFT
Note 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The ambient temperature derating of 5℃/1000 m is needed for operating altitude greater than 2000m(6500ft).
7. The power supply is considered as a component which will be installed into a finalequipment,The final equipment must be re-confirmed that it still meets EMC directives, For guidance on how to perform these EMC tests.
Dimensional Drawing

Dimensional drawing

Block diagram

 

Get A Quote

Further information or a personal consultation? Our products and know-how are there to provide solutions.

RELATED PRODUCTS
RELATED NEWS
YOU MAY ALSO WANT TO SEE
GET A QUOTE TODAY!
icon
icon
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.